Skip to content
  • There are no suggestions because the search field is empty.

DESTINI Hub Version 2026 3.0.0 Release Notes

This article describes major improvements and bug fixes available in DESTINI Hub Version 2026 3.0.0.

DESTINI Hub Updates

Database & Cost Updates

2027 BNI Costbook Updates: Hub database includes line item, assembly, and WBS property updates, new line items, updated BNI numbers, cleaned up duplicate WBS properties, and replaced discontinued line items (DC-9132).

Dashboards Improvements

Standard Dashboard Classifications WBS Alignment: Updated WBS properties on the Classifications tab in the Standard Dashboard (including Masterformat Level 1, CSI Level 1, and Uniformat Levels 1 & 2) to maintain full consistency with Hub WBS properties (DC-9355).

Assemblies & Cost Data Corrections

  • Lighting Assembly Discontinued Line Item Replacements: Replaced discontinued 2026 line items in the Lighting Assembly with active 2027 BNI cost line items, updating deprecated recessed fixtures and high/low-bay open/enclosed lighting to current LED equivalents (DC-9646).
  • Doors, Frames & Hardware Assembly "None" Option: Added a missing "0) None" option to the Door Type choice in the Doors Frames Hardware Assembly, allowing users to deselect doors and automatically hide dependent hinge, lockset, and closer choices (DC-9644).
  • Shaft Wall Assembly Finish Formula & UOM: Corrected a no-cost line item in the Shaft Wall Finish choice to use "." as the Unit of Measure and set its formula to 0, preventing unintended quantity calculations (DC-9640).
  • Slab on Grade Rebar Ask When Condition: Corrected a typo in the Ask When criteria for galvanized rebar variables (OPTION_RebarWeight1, RebarSpace1, RebarSpace2, OPTION_SOGSecondMat, and SOGRebarWasteFactor) so they properly evaluate against 2) Rebar - Galvanized instead of 1) Rebar - Galvanized (DC-9641).
  • Interior Partition Metal Stud Insulation Choices: Fixed typos in the Ask When criteria for Insulation 2 and Insulation 4 choices to ensure conditional visibility properly matches the available Metal Stud Partition Studs choices (DC-9643).
  • Room Finishes General Wainscot Height Visibility: Simplified the Ask When rule on the WainscotHeight variable in the Room Finishes - General Assembly to display whenever a Wainscot Material selection is made (<>""), removing an unnecessary check for "0) None" (DC-9645).

WBS Management Fixes

CSI Level 3 WBS Value Cleanup: Removed an errant rogue value from the CSI Level 3 WBS values list in the Hub database (DC-7369).

To access downloadable files related to this release, visit the corresponding training lessons on the Beck Technology Training Portal. Access requires an active DESTINI Hub or DESTINI Hub+ subscription. For access issues, contact training@becktechnology.com.  

DESTINI Hub+ Updates

Database & Cost Updates

  • Hub+ Unit Price Database: Updated line item unit price costs with 2027 BNI cost data, added new line items, updated BNI numbers, cleaned up duplicate WBS properties, and replaced discontinued line items. 
  • Hub+ Self Perform Database: Updated line item costs with 2027 BNI cost data. Updated with 2027 City Multiplier regional markups, added new line items, updated BNI numbers, cleaned up duplicate WBS properties, and replaced discontinued line items (DC-9132) and city multiplier regional markups.

Dashboards & Forms

  • Dynamic Fee & Alternate Fee Column Lookups: Updated fee lookup and Indirect Cost calculation formulas on the References tab of the Dashboard to dynamically resolve column locations using MATCH and INDIRECT references, eliminating manual formula edits when columns shift (DC-9445).
  • Dynamic Dashboard Two-Level Summary Protection: Resolved an issue where the Two Level Summary tab was protected in the Cloud Dynamic Dashboard, restoring the ability to use the control print filter and WBS dropdown in Estimator. (DC-9700)
  • Standard Dashboard Classifications WBS Alignment: Updated WBS properties on the Classifications tab in the Standard Dashboard (including Masterformat Level 1, CSI Level 1, and Uniformat Levels 1 & 2) to maintain full consistency with Hub WBS properties (DC-9355).
  • Dynamic Dashboard Two-Level Summary Print Filter: Updated the print filter logic on the Legacy Dynamic Dashboard Two-Level Summary to evaluate both WBS property values and total values rather than only checking for non-zero totals, preventing empty WBS rows from outputting print flags (DC-8923).
  • Dynamic Dashboard Estimate Comparison Tab WBS Values: Resolved an issue in Legacy Dynamic Dashboards where the Estimate Comparison tab failed to pull and display all configured WBS property values (DC-9142).

Assemblies & Cost Data Corrections

  • Lighting Assembly Discontinued Line Item Replacements: Replaced discontinued 2026 line items in the Lighting Assembly with active 2027 BNI cost line items, updating deprecated recessed fixtures and high/low-bay open/enclosed lighting to current LED equivalents (DC-9646).
  • Doors, Frames & Hardware Assembly "None" Option: Added a missing "0) None" option to the Door Type choice in the Doors Frames Hardware Assembly, allowing users to deselect doors and automatically hide dependent hinge, lockset, and closer choices (DC-9644).
  • Shaft Wall Assembly Finish Formula & UOM: Corrected a no-cost line item in the Shaft Wall Finish choice to use "." as the Unit of Measure and set its formula to 0, preventing unintended quantity calculations (DC-9640).
  • Slab on Grade Rebar Ask When Condition: Corrected a typo in the Ask When criteria for galvanized rebar variables (OPTION_RebarWeight1, RebarSpace1, RebarSpace2, OPTION_SOGSecondMat, and SOGRebarWasteFactor) so they properly evaluate against 2) Rebar - Galvanized instead of 1) Rebar - Galvanized (DC-9641).
  • Interior Partition Metal Stud Insulation Choices: Fixed typos in the Ask When criteria for Insulation 2 and Insulation 4 choices to ensure conditional visibility properly matches the available Metal Stud Partition Studs choices (DC-9643).
  • Room Finishes General Wainscot Height Visibility: Simplified the Ask When rule on the WainscotHeight variable in the Room Finishes - General Assembly to display whenever a Wainscot Material selection is made (<>""), removing an unnecessary check for "0) None" (DC-9645).

WBS Management Fixes

CSI Level 3 WBS Value Cleanup: Removed an errant rogue value from the CSI Level 3 WBS values list in the Hub database (DC-7369).

To access downloadable files related to this release, visit the corresponding training lessons on the Beck Technology Training Portal. Access requires an active DESTINI Hub or DESTINI Hub+ subscription. For access issues, contact training@becktechnology.com.